This prototype 2.6-m diameter metal-mesh antenna reflector represents a big step forward for the European space sector: versions can be manufactured to reproduce any surface pattern that antenna designers wish, something that was previously possible only with traditional solid antennas.

"This is really a first for Europe," says ESA antenna engineer Jean-Christophe Angevain. "China and the US have also been working hard on similar shaped mesh reflector technology. It is needed so that sufficiently large antennas can be deployed in orbit, which would otherwise be too bulky to fit inside a launcher fairing, while also meeting required performance levels."

ESA's AMPER (Advanced techniques for mesh reflector with improved radiation pattern performance) project performed with Large Space Structures GmbH in Germany as prime and TICRA in Denmark as subcontractor.

Antenna reflectors for satellites are often surprisingly 'lumpy' looking. Their basic paraboloid convex shape is distorted with additional peaks and valleys. These serve to contour the resulting radio frequency beam, typically to boost signal gain over target countries and minimise it beyond their borders.

"This tailored surface shaping is traditionally done with traditional metal or carbon fibre reinforced plastic composite reflectors," adds Jean-Christophe.

"The challenge was how to reproduce such shaping using a mesh reflector design. The obvious solution would have been a conventional tension truss double layer solution, with the mesh held together tautly on an alternating 'push and 'pull' basis. A smart alternative solution has been proposed and followed by the team."

Leri Datashvili, CEO and Chief Designer of Large Space Structures explains: "The design of our shaped mesh reflector is based on tension members supported by a peripheral truss structure which enables decoupling of the shaped surface and the structure. Therefore, the design can be implemented for any size of reflector, for any frequencies ranging from P-band to Ka-band. Furthermore, either deployable or fixed reflector technology can be realised."

"This 2.6-m 'breadboard' prototype proves the concept at C-band frequency, and the RF measurements have shown good correlation with radio-frequency and mechanical predictions" adds Jean-Christophe.

The AMPER project was supported through ESA's Technology Development Element, with prototype testing carried out in ESA's Hertz chamber at its ESTEC technical centre in the Netherlands. As a next step the AMPER team plan to produce a deployable version, aimed at Earth observation as well as telecommunications uses.

Meanwhile this prototype reflector will be on show during next month's virtual ESA Open Day at ESTEC.

Related Links
AMPER at ESA
Space Technology News - Applications and Research

Tweet

Thanks for being here; We need your help. The Space Media Network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceMediaNetwork Contributor $5 Billed Once credit card or paypal		SpaceMediaNetwork Monthly Supporter $5 Billed Monthly paypal only

Announcing Homestead: satellite ground station coming soon to Chippewa County
Kinross MI (SPX) Sep 15, 2020
Oakman Aerospace, Inc. (OAI) and Chippewa County Economic Development Corporation (CCEDC) are pleased to announce a partnership to establish a ground station, referred to as the Homestead ground station, at Chippewa County International Airport (CIU). The Homestead ground station, expected to be fully assembled by first-quarter 2021, will utilize a high-gain 5.5-meter parabolic dish antenna supporting S-band uplink and downlink as well as X-band downlink for satellite communications and data proce ... read more